Updating image u boot 2018 08 svn587 for imapd
In /boot/u Env.txt: and reboot the system, it'll flash the e MMC on the next bootup.(make sure to remove the micro SD after flashing is complete, otherwise it'll just keep on re-flashing the e MMC) We can't ship support for everything on release day, so we push out new kernels as fixes, support for new capes, etc are posted on the mainline list.The Windows Setup application is used to upgrade a computer to Windows 10, or to perform a clean installation.Windows Setup starts and restarts the computer, gathers information, copies files, and creates or adjusts configuration settings.To set up the standalone micro SD image to automatically flash the e MMC on powerup.Login as debian (password = temppwd) and edit /boot/u with nano (sudo nano /boot/u Env.txt) or your preferred editor.When performing an operating system upgrade, Windows Setup uses phases described below. After the first reboot, the user interface will remain the same until the upgrade is completed.Percent progress is displayed and will advance as you move through each phase, reaching 100% at the end of the second boot phase.
To troubleshoot a failed upgrade that has returned a result code of 0x C1900101, analyze the extend code to determine the Windows Setup phase, and see the Resolution procedures section later in this topic.
Instead an init script has been set up to load the cape/capes as soon as possible.
Built-in Cape: capemgr.enable_partno=BB-SPIDEV1 slot #7: Requesting part number/version based 'BB-SPIDEV1-00A0slot #7: Requesting firmware 'BB-SPIDEV1-00A0.dtbo' for board-name 'Override Board Name', version '00A0' slot #7: dtbo 'BB-SPIDEV1-00A0.dtbo' loaded; converting to live tree capemgr.enable_partno=BB-SPI1-01 slot #7: Requesting part number/version based 'BB-SPI1-01-00A0slot #7: Requesting firmware 'BB-SPI1-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0' failed to load firmware 'BB-SPI1-01-00A0.dtbo' loader: failed to load slot-7 BB-SPI1-A0 (prio 0) W: GPG error: Release: The following signatures were invalid: KEYEXPIRED 1418840246 KEYEXPIRED 1418840304 KEYEXPIRED 1418840246 KEYEXPIRED 1418840246 KEYEXPIRED 1418840304 sed -i -e 's: Permit Empty Passwords no: Permit Empty Passwords yes:g' /etc/ssh/sshd_config sed -i -e 's: Use PAM yes: Use PAM no:g' /etc/ssh/sshd_config sed -i -e 's: Permit Root Login without-password: Permit Root Login yes:g' /etc/ssh/sshd_config U-Boot SPL 2018.01-rc2-00002-g23388d96ac (Dec 19 2017 - ) Trying to boot from MMC1 U-Boot 2018.01-rc2-00002-g23388d96ac (Dec 19 2017 - -0600), Build: jenkins-github_Bootloader-Builder-19 [email protected]:~$ cd /opt/scripts/tools/ [email protected]:/opt/scripts/tools$ git pull [email protected]:/opt/scripts/tools$ sudo ./| grep bootloader bootloader:[micro SD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.01-rc2-00002-g23388d] Kernel Overlays are going bye-bye, too many bugs, too many race conditions, no kernel maintainers interested.
We've said our farewells and U-Boot Overlays is the way forward: https://elinux.org/Beagleboard: Beagle Bone Black_Debian#U-Boot_Overlays With multiple parties working on the U-Boot infrastructure.
The rough transition plan is: Stage 1 is complete, all current images use U-Boot Overlays by default.